Translate
Violation Detail
Standard Cited: 19100219 C03 Mechanical power-transmission apparatus.
Inspection Nr: 1202344.015
Citation: 01009B
Citation Type: Serious
Abatement Date: 02/12/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 06/27/2017
Nr Instances: 2
Nr Exposed: 6
Related Event Code (REC):
Gravity: 5
Report ID: 0522500
Contest Date: 07/06/2017
Final Order: 01/10/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 01/10/2019 | $0.00 | 02/12/2019 | Serious | |
| Penalty | C: Contested | 07/07/2017 | $0.00 | 07/17/2017 | Serious | |
| Penalty | Z: Issued | 06/27/2017 | $0.00 | 07/17/2017 | Serious |
Text For Citation: 01 Item/Group: 009B Hazard:
29 CFR 1910.219(c)(3): Guarding vertical and inclined shafting. Vertical and inclined shafting seven (7) feet or less from floor or working platform, excepting maintenance runways, shall be enclosed with a stationary casing in accordance with requirements of paragraphs (m) and (o) of this section. a. On or about February 7, 2017, located in the mold repair shop, employees operated a King Mill from King Machine Tool Division, Serial Number 3291 that had a two vertical shafts that were not guarded between 34 to 58 inches above the floor to prevent employee contact with the rotating vertical shafts, exposing the employees to a caught-in/struck-by hazard. b. On or about February 8, 2017, in the ladle repair area, the southernmost wall mounted Neptune mortar mixer had an unguarded vertical rotating shaft, thereby exposing employees to a caught-in hazard. The unguarded vertical shaft was approximately 34 inches from the floor level.