Violation Detail
Standard Cited: 6A0001 General Duty Clause
Inspection Nr: 309960656
Citation: 01009
Citation Type: Serious
Abatement Status: X
Initial Penalty: $450.00
Current Penalty: $315.00
Issuance Date: 07/29/2009
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 08/17/2009
Gravity: 01
Report ID: 0257250
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/12/2009 | $315.00 | 08/17/2009 | Serious | |
| Penalty | Z: Issued | 07/29/2009 | $450.00 | 08/17/2009 | Serious |
Text For Citation: 01 Item/Group: 009 Hazard: FALLING
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: a. Receive injuries, fractures or death due to mechanism failure manual mechanism hoist, trademark Milwaukee, 1 ton were used by the employee for handling human corpses. The hoist mechanism was not inspected. The hoist mechanism was located in embalming room. Among others methods one feasible and acceptable abatement method to correct this hazard is to performed periodic inspections as defined in ANSI B30.16-1973,Sec 16- 2.2.1.3 a. Recibir lesiones,fracturas o muerte debido a falla de mecanismo manual de izar marca Milwaukee 1-ton donde era usado por empleado para manejar cadaveres. El mecanismo de izar no estaba inspeccionado. El mecanismo de izar estaba localizado en el cuarto de embalsamamiento. Entre otros metodos, un metodo y factible de corregir es realizar inspecciones periodicas segun se define en ANSI B30.16-1973, Sec 16-2.2.1.3
Translate