Translate
Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1301374.015
Citation: 01009
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $7,114.00
Current Penalty: $3,557.00
Issuance Date: 09/06/2018
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 08/19/2019
Gravity: 5
Report ID: 0728500
Contest Date: 09/27/2018
Final Order: 06/19/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 06/19/2019 | $3,557.00 | 08/19/2019 | Serious | |
| Penalty | C: Contested | 10/11/2018 | $7,114.00 | Serious | ||
| Penalty | Z: Issued | 09/06/2018 | $7,114.00 | Serious |
Text For Citation: 01 Item/Group: 009 Hazard:
29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed: The employer is failing to protect employees from electrical and fire hazards while operating the bandsaw and/or performing housekeeping tasks near and around the bandsaw. This was most recently documented on or about April 12, 2018, at American Walnut Company, LLC located at 2801 South 2nd Street, Saint Joseph, Missouri. (a) There was a fitting that was not effectively closed in a junction box at the left side of Bandsaw #1 near the floor in the Gun Room. (b) There was an open knockout that was not effectively closed in a junction box at the left side of Bandsaw #1 near the floor in the Gun Room.