Translate
Violation Detail
Standard Cited: 19100219 E03 I Mechanical power-transmission apparatus.
Inspection Nr: 994617.015
Citation: 01008B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/05/2015
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 02/25/2015
Gravity: 5
Report ID: 0626600
Contest Date:
Final Order: 02/25/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/25/2015 | $0.00 | 02/25/2015 | Serious | |
| Penalty | Z: Issued | 02/05/2015 | $0.00 | 02/25/2015 | Serious |
Text For Citation: 01 Item/Group: 008B Hazard:
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): The employer does not ensure that vertical or inclined belts are enclosed by guards. This violation occurred on or about September 22, 2014, near the clean grain elevator where an employee was exposed to caught-in hazards when operating a conveyor without enclosing the belts. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that vertical or inclined belts are enclosed by guards.