Translate
Violation Detail
Standard Cited: 19100213 C02 Woodworking machinery requirements.
Inspection Nr: 1642218.015
Citation: 01008B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 06/08/2023
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 07/10/2023
Gravity: 5
Report ID: 0521100
Contest Date: 07/03/2023
Final Order: 10/30/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/30/2023 | $0.00 | 07/10/2023 | Serious | |
| Penalty | C: Contested | 07/06/2023 | $0.00 | 07/10/2023 | Serious | |
| Penalty | Z: Issued | 06/08/2023 | $0.00 | 07/10/2023 | Serious |
Text For Citation: 01 Item/Group: 008B Hazard:
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced. On or about January 6, 2023, at an establishment located at 200 Woodland Drive in Random Lake, Wisconsin; the Delta table saw (S/N: 1322, Model 34888) was not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator.