Translate
Violation Detail
Standard Cited: 19100212 A02 General requirements for all machines.
Inspection Nr: 1104919.015
Citation: 01008B
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/06/2016
Nr Instances: 3
Nr Exposed: 20
Abatement Date:
Gravity:
Report ID: 0522500
Contest Date: 05/18/2016
Final Order: 10/16/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/16/2017 | $0.00 | Other | ||
| Penalty | C: Contested | 05/26/2016 | $0.00 | Serious | ||
| Penalty | Z: Issued | 05/06/2016 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 008B Hazard:
29 CFR 1910.212(a)(2): General requirements for machine guards. Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself. a. In the grain handling department there was a 3 inch by 3 inch hole in the guard for motor FX1246, thereby exposing employees to a caught in hazard. b. In the grain handling department motor FA-1436 had two 3 inch holes in the guard, thereby exposing employees to a caught in hazard. c. In the grain handling department the motor FA-1438 had a 3 inch hole on the top of the guard, thereby exposing employees to a caught in hazard.