Translate
Violation Detail
Standard Cited: 19100261 C15 III Pulp, paper, and paperboard mills.
Inspection Nr: 986883.015
Citation: 01008
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,675.00
Current Penalty: $4,675.00
Issuance Date: 01/15/2015
Nr Instances: 7
Nr Exposed: 8
Abatement Date: 03/05/2015
Gravity: 5
Report ID: 0418400
Contest Date:
Final Order: 02/09/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/09/2015 | $4,675.00 | 03/05/2015 | Serious | |
| Penalty | Z: Issued | 01/15/2015 | $4,675.00 | 03/05/2015 | Serious |
Text For Citation: 01 Item/Group: 008 Hazard:
29 CFR 1910.261(c)(15)(iii): Turning drums on pulpwood conveyor(s) were not guarded: A) #3 Tower east west belt, T3 and T4 conveyors, or about August 6, 2014, the rotating wing drum and the conveyor belt was not properly guarded, exposing employees to a rotating drum and an in-running nip point hazard. B) #3 Hardwood reclaim conveyor, on or about August 6, 2014, the rotating wing drum and the conveyor belt was not properly guarded, exposing employees to a rotating drum and an in-running nip point hazard. C) #2 west T3 and T4 stacker conveyors, on or about August 7, 2014, the rotating wing drum and the conveyor belt was not properly guarded, exposing employees to a rotating drum and an in-running nip point hazard. D) #1 tower west to T3 and T4 conveyors, on or about August 7, 2014, the rotating wing drum and the conveyor belt was not properly guarded, exposing employees to a rotating drum and an in-running nip point hazard. E) North South Bark conveyor, on or about September 23, 2014. August 7, 2014, the rotating wing drum and the conveyor belt were not properly guarded, exposing employees to a rotating drum and an in-running nip point hazard. F) Pulp Mill South tripper conveyor, on or about September 24, 2014, the conveyor belt at the head roll drive end was not properly guarded, exposing employees to an in-running nip point hazard. G) Pulp Mill South tripper conveyor, on or about September 24, 2014, the conveyor belt at the tail roll drive end was not properly guarded, exposing employees to an in-running nip point hazard.