Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1400418.015
Citation: 01007C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,630.00
Current Penalty: $0.00
Issuance Date: 10/25/2019
Nr Instances: 3
Nr Exposed: 6
Abatement Date: 02/26/2021
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 11/15/2019
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | P: Petition to Mod Abatement | 11/05/2020 | $0.00 | 02/26/2021 | Serious | |
Penalty | P: Petition to Mod Abatement | 07/27/2020 | $0.00 | 10/29/2020 | Serious | |
Penalty | I: Informal Settlement | 11/15/2019 | $0.00 | 06/30/2020 | Serious | |
Penalty | Z: Issued | 10/25/2019 | $6,630.00 | 11/14/2019 | Serious |
Text For Citation: 01 Item/Group: 007C Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about May 8, 2019, the following machinery did not have point of operation safeguarding. 1. The Chicago hydraulic press brake had dual foot pedal activation without operator hand protection including the backside of the press was open and accessible to employees while being operated. 2. Mubea (2 separate) hydraulic ironworker machines had channel, angle, bar and tube cutters that were not guarded. One hole puncher had no guarding and one notcher had an unsecured guard.