Translate
Violation Detail
Standard Cited: 19100252 A02 IV General requirements.
Inspection Nr: 1787826.015
Citation: 01007B
Citation Type: Serious
Abatement Date: 04/03/2025
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/14/2025
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity: 10
Report ID: 0522500
Contest Date: 04/10/2025
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | C: Contested | 04/11/2025 | $0.00 | 04/03/2025 | Serious | |
| Penalty | Z: Issued | 03/14/2025 | $0.00 | 04/03/2025 | Serious |
Text For Citation: 01 Item/Group: 007B Hazard:
29 CFR 1910.252(a)(2)(iv): Authorization. Before cutting or welding is permitted, the area shall be inspected by the individual responsible for authorizing cutting and welding operations. He shall designate precautions to be followed in granting authorization to proceed preferably in the form of a written permit. a) Located at 2734 Home Road, Grove City, OH 43123: On or about November 13, 2024, prior to allowing employees to spot weld inside of a section of HVAC duct to repair insulation, the employer did not ensure the space was inspected by an individual responsible for authorizing welding operations and designating precautions to be followed to achieve authorization. Employees were allowed to spot weld in the presence of a flammable chemical adhesive.