Translate
Violation Detail
Standard Cited: 19100334 A02 II Use of equipment.
Inspection Nr: 1175342.015
Citation: 01007B
Citation Type: Serious
Abatement Date: 03/21/2017 4
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/27/2017
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0524500
Contest Date: 03/13/2017
Final Order: 09/04/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 09/04/2018 | $0.00 | 03/21/2017 | Serious | |
| Penalty | C: Contested | 03/15/2017 | $0.00 | 03/21/2017 | Serious | |
| Penalty | Z: Issued | 02/27/2017 | $0.00 | 03/21/2017 | Serious |
Text For Citation: 01 Item/Group: 007B Hazard:
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service: Employees performing welding activities are exposed to electrical shocks and burns when using the Millermatic 252 MIG welder and the employer did not ensure that damaged equipment was removed from service. This violation was last observed on September 6, 2016, in the Fabrication Shop. To abate this violation, the employer must ensure that all damaged equipment is removed from service. Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including a copy of site-specific program detailing the procedures used to ensure compliance and training of employees.