Text For Citation: 01 Item/Group: 007B Hazard:

29 CFR 1910.219(c)(3): Vertical or inclined shafting seven -7 feet or less from floor or working platform was not enclosed with stationary casing(s): On or about 7/26/2016 on the production floor, South side baggers including but not limited to: a. line 4 bagger, employees performing bagging operations were exposed to caught-by and avulsion related hazards where the vertical rotating shaft was not guarded. The 21 inch long, 3/4 inch diameter shaft, was located 55 inches above the floor. b. line 1 bagger, employees performing bagging operations were exposed to caught-by and avulsion related hazards where the 21 inch long, 3/4 inch diameter vertical rotating shaft was not guarded 4 inches belowand 6 inches above the 11 inch guard, located 55 inches above the floor. c. line 2 bagger, employees performing bagging operations were exposed to caught-by and avulsion related hazards where the 21 inch long, 3/4 inch diameter vertical rotating shaft was not guarded 3 inches below and 7 inches above the 11 inch guard, located 55 inches above the floor. d. line 3 bagger, employees performing bagging operations were exposed to caught-by and avulsion related hazards where the 21 inch long, 3/4 inch diameter vertical rotating shaft was not guarded, located 55 inches above the floor. e. line 5 bagger, employees performing bagging operations were exposed to caught-by and avulsion related hazards where the 21 inch long, 3/4 inch diameter vertical rotating shaft was not guarded 7 inches below and 3 inches above the 11 inch guard, located 55 inches above the floor. f. line 6 bagger, employees performing bagging operations were exposed to caught-by and avulsion related hazards where the 21 inch long, 3/4 inch diameter vertical rotating shaft was not guarded 2 inches below and 11 inches above the 8 inch guard, located 55 inches above the floor.