Translate
Violation Detail
Standard Cited: 19100219 C02 I Mechanical power-transmission apparatus.
Inspection Nr: 1165746.015
Citation: 01007A
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $12,675.00
Current Penalty: $12,675.00
Issuance Date: 01/20/2017
Nr Instances: 18
Nr Exposed: 198
Related Event Code (REC):
Gravity: 10
Report ID: 0418100
Contest Date:
Final Order: 02/17/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/17/2017 | $12,675.00 | Serious | ||
| Penalty | Z: Issued | 01/20/2017 | $12,675.00 | Serious |
Text For Citation: 01 Item/Group: 007A Hazard:
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: On or about 7/26/2016 in the production area operators and nearby workers were exposed to caught-in related injuries including but not limited to avulsions and amputations where: a. offline 12, trap winder guard was laying on the floor and not installed, exposing the 8 inch shaft located 8 inches above the floor, b. line 19, inspector head was removed, exposing the threaded and keyed, 3/4 inch diameter, 7 1/2 inch long shaft, located 71 inches above the floor, c. line 5 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 19 inches above the floor, d. line 3 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 26 inches above the floor, e. line 1 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 1/4 inch long, located 28 inches above the floor, f. line 4 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 1/4 inch long, located 27 inches above the floor, g. line 8 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 1/4 inch long, located 27 inches above the floor, h. line 9 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 19 inches above the floor, I. line 11 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 19 inches above the floor, j. line 14 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 19 inches above the floor, k. line 16 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 19 inches above the floor, l. line 18 un-scrambler, unguarded rotating, keyed, 3/4 inch diameter, 2 inch long, located 19 inches above the floor, m. Printer 1A, bagger, trap winder guard was located on floor, exposing the 8 inch shaft located 8 inches above the floor, n. Printer 19, bagger, trap winder guard was missing, exposing the 8 inch shaft located 8 inches above the floor, o. Line 34 bagger, trap winder guard was missing, exposing the 8 inch shaft located 8 inches above the floor, p. Bagger 25 conveyor belt, 1 inch diameter, 2 3/4 inch long roller shaft, q. Line 21 Screw stacker unguarded rotating, keyed, 3/4 inch diameter, 2 1/4 inch long, located 20 inches above the floor, r. Printer D24, bagger, trap winder guard was missing exposing the 8 inch shaft located 8 inches above the floor.