Translate
Violation Detail
Standard Cited: 19100303 B01 II General.
Inspection Nr: 1037332.015
Citation: 01007A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $5,000.00
Current Penalty: $5,000.00
Issuance Date: 07/30/2015
Nr Instances: 6
Nr Exposed: 60
Abatement Date: 07/31/2015
Gravity: 5
Report ID: 0625400
Contest Date:
Final Order: 08/20/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/20/2015 | $5,000.00 | 07/31/2015 | Serious | |
| Penalty | Z: Issued | 07/30/2015 | $5,000.00 | 07/31/2015 | Serious |
Text For Citation: 01 Item/Group: 007A Hazard:
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided: On or about February 9, 2015 and in times prior thereto, the following electrical hazards were found in the production area; a. Baldor Relianget 460 volt motor had a conduit attached to the contactor box that was broken. b. 480 VAC disconnect marked "E1" for "I 14" Chiller had the load side conductor attached to a variable sized knock out. A ring of the knock out broke out leaving the attachment device ineffective. c. Metal armor conduit to grinding machine located in the grinding area was broken. d. 120 volt duplex and fourplex outlets, located in shipping and receiving on a metal pole near disconnect #3 had become detached from the support pole and were hanging from the supply cords. e. 480 volt metal conduit to starter near 30 KVA transformer, located in the grinding area was broken. f. 480 volt plastic conduit to Compressor #3 Kaeser, located in the outside utility area was broken.