Translate
Violation Detail
Standard Cited: 19100212 B General requirements for all machines.
Inspection Nr: 909867.015
Citation: 01007
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $1,200.00
Current Penalty: $720.00
Issuance Date: 07/16/2013
Nr Instances: 4
Nr Exposed: 4
Related Event Code (REC): C
Gravity: 1
Report ID: 0316700
Contest Date:
Final Order: 07/30/2013
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/30/2013 | $720.00 | Serious | ||
| Penalty | Z: Issued | 07/16/2013 | $1,200.00 | Serious |
Text For Citation: 01 Item/Group: 007 Hazard:
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: (a) Drill Press - Employees used the Ryobi 1/2 inch drill press to manufacture custom cabinetry. The drill press was used while on a cart with wheels. The drill press fell over and was damaged because it was not securely anchored to prevent walking or moving. This condition was most recently observed on or about June 4, 2013. (b) Profile Sander - Employees used the MB Maschinebau GnbH profile sander to manufacture custom cabinetry. The profile sander was connected to power but was still on it's shipping crate skid on or about June 4, 2013. (c) Band Saw - Employees used the Tannewivz band saw to manufacture custom cabinetry. The bandsaw was resting on a wooden skid but was not securely anchired to prevent walking or moving on or about June 4, 2013. (d) Edge Sander - Employees used the Ekstrom - Carlson No112A edge sander to manufacture custom cabinetry. The edge sander was resting on two wooden 4 X 4 timbers but was not securely anchored to prevent walking or moving, on or about June 4, 12013. No abatement certification or documentation required.