Translate
Violation Detail
Standard Cited: 19100212 A03 III General requirements for all machines.
Inspection Nr: 1601123.015
Citation: 01007
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $10,256.00
Current Penalty: $6,335.00
Issuance Date: 10/07/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 11/18/2022
Gravity: 5
Report ID: 0213900
Contest Date:
Final Order: 11/02/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/02/2022 | $6,335.00 | 11/18/2022 | Serious | |
| Penalty | Z: Issued | 10/07/2022 | $10,256.00 | 11/03/2022 | Serious |
Text For Citation: 01 Item/Group: 007 Hazard:
29 CFR 1910.212(a)(3)(ii) Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a)Fabrication area: The guard covering the punch on the Niagara Punch Press did not adjust to the base of the work rest, exposing employees to crushing hazards. The guard did not adjust to less than 2 1/4 inches from the work rest, on or about. Observed on or about 6/9/22. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.