Translate
Violation Detail
Standard Cited: 19100212 A03 IV E General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1541509.015
Citation: 01007
Citation Type: Serious
Abatement Status:
Initial Penalty: $7,022.00
Current Penalty: $0.00
Issuance Date: 01/06/2022
Nr Instances: 2
Nr Exposed: 2
Abatement Date: 02/02/2022
Gravity: 5
Report ID: 0523400
Contest Date: 02/01/2022
Final Order: 01/17/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 01/17/2023 | $0.00 | 02/02/2022 | Serious | |
| Penalty | C: Contested | 02/23/2022 | $7,022.00 | 02/02/2022 | Serious | |
| Penalty | Z: Issued | 01/06/2022 | $7,022.00 | 02/02/2022 | Serious |
Text For Citation: 01 Item/Group: 007 Hazard:
29 CFR 1910.212(a)(3)(iv)(e): Employee(s) were using milling machines without point of operation guarding in place. (a) On or about August 4, 2021, at the worksite located at 714 E. Keefe Ave, Milwaukee WI, the employer did not ensure machines including, but not limited to. a Webb milling machine was equipped with guarding, thereby exposing workers to struck-by hazards. (b) On or about August 4, 2021, at the worksite located at 714 E. Keefe Ave, Milwaukee WI, the employer did not ensure machines including, but not limited to, a Clausing milling machine was equipped with guarding, thereby exposing workers to struck-by hazards.