Violation Detail
Standard Cited: 19100265 C26 VIII Sawmills.
Inspection Nr: 1428560.015
Citation: 01007
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,630.00
Current Penalty: $3,315.00
Issuance Date: 01/15/2020
Nr Instances: 2
Nr Exposed: 10
Abatement Date: 02/13/2020
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 02/10/2020
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 02/10/2020 | $3,315.00 | 02/13/2020 | Serious | |
Penalty | Z: Issued | 01/15/2020 | $6,630.00 | 02/13/2020 | Serious |
Text For Citation: 01 Item/Group: 007 Hazard:
29 CFR 1910.265(c)(26)(viii): 29 CFR 1910.265(c)(26)(viii): Lower landing area(s) of stacker(s) and unstacker(s) were not guarded by enclosure(s) that prevented entrance to the area(s) or pit(s) below the hoist platform(s), nor were entrances protected by electrically interlocked gates which, when opened, disconnect the power and set the hoist brakes. *If an interlock is not installed, other positive means of protecting the entrance shall be provided: (a) Employees working near the PLC Inotech Sorter and Stacking machine were exposed to struck-by, crushed-by, and pinch point hazards created by the sorting bins raising and lowering. There was no form of machine guarding to prevent employees and operators from accessing the danger zones during operation. (b) Employees working and traveling under the PLC Inotech Sorter and Stacking machine were exposed to struck-by, crushed-by, and pinch point hazards created by the lumber elevator to the grading table and the stacking lift table. There was no form of machine guarding to prevent employees and operators from accessing the danger zones during operation.