Translate
Violation Detail
Standard Cited: 19100219 C02 I Mechanical power-transmission apparatus.
Inspection Nr: 1044858.015
Citation: 01007
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,000.00
Current Penalty: $3,000.00
Issuance Date: 09/02/2015
Nr Instances: 40
Nr Exposed: 1
Abatement Date: 09/24/2015
Gravity: 10
Report ID: 0626000
Contest Date:
Final Order: 10/01/2015
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/01/2015 | $3,000.00 | 09/24/2015 | Serious | |
| Penalty | Z: Issued | 09/02/2015 | $7,000.00 | 09/24/2015 | Serious |
Text For Citation: 01 Item/Group: 007 Hazard:
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: On and before March 6, 2015, on all forty (40) lanes at this location, the employer did not assure employees were protected from the hazard of being caught-in rotating parts. An employee resetting the re-spot cell on the pin setting machine for lane thirty (30) was exposed to inadequately guarded horizontal metal shafts located three (3) feet ten (10) inches from the floor. The opening is three (3) feet and the shaft is located sixteen (16) inches behind the opening that employees use to access the pin setting machine.