Translate
Violation Detail
Standard Cited: 19100147 D04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1740802.015
Citation: 01006B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/04/2024
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 10/17/2024
Gravity: 10
Report ID: 0418100
Contest Date: 10/28/2024
Final Order: 03/26/2025
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/26/2025 | $0.00 | 10/17/2024 | Serious | |
| Penalty | C: Contested | 11/19/2024 | $0.00 | 10/17/2024 | Serious | |
| Penalty | Z: Issued | 10/04/2024 | $0.00 | 10/17/2024 | Serious |
Text For Citation: 01 Item/Group: 006B Hazard:
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) The employer fails to ensure effective measures to prevent struck-by and caught-between hazards as demonstrated on or about May 15, 2024 where an employee performed maintenance on forklift such as, but not limited to, re-attaching the right tine sensor with the forks under load and the carriage was visibly lowering with the worker below. To abate this hazard, the employer must ensure that the forklift is shut down or turned off properly and the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], stored energy [(d)(5), if applicable], and verification of isolation [(d)(6)] are implemented.