Translate
Violation Detail
Standard Cited: 19100305 B02 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1277936.015
Citation: 01006B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/08/2018
Nr Instances: 9
Nr Exposed: 2
Abatement Date: 05/31/2018
Gravity: 10
Report ID: 0524500
Contest Date:
Final Order: 05/29/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/29/2018 | $0.00 | 05/31/2018 | Serious | |
| Penalty | Z: Issued | 05/08/2018 | $0.00 | 05/31/2018 | Serious |
Text For Citation: 01 Item/Group: 006B Hazard:
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: On or about November 16, 2017 employees were exposed to electric shock and fire hazards and the employer did not ensure that the live electrical fixtures were effectively closed: a. The east junction box near the west entrance to the boiler room provided 220 volt power to silo controls and the cover was not completely attached and wires were hanging outside the box. b. The west junction box near the west entrance to the boiler room provided 220 volt power to silo controls and the cover was not completely attached and wires were hanging outside the box. c. The 3 phase, 3 pole junction box on the south wall in the boiler room that had powered blowers was missing the front cover and live conductors were exposed. d. The single phase junction box on the west wall in the boiler room that powered outside wires was missing the front cover and live conductors were exposed. e. The polyphase junction box on the west wall in the boiler room that powered the heater in the room was missing the front cover and live conductors were exposed. f. The polyphase junction box on the west wall in the boiler room that powered the silo feeder controls was missing the front cover and live conductors were exposed. g. The electric panel on the south wall near the air compressor in the boiler room was missing the front cover and live conductors were exposed. h. The junction box on the south wall in the boiler room below and connected to multiple electric panels was missing the front cover and live electrical wires were exposed. i. The junction box on the south wall above the heater power switch in the truck repair shop that controls the heaters did not have the cover secured and live electrical wires were exposed.