Translate
Violation Detail
Standard Cited: 19100219 E01 I Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1212725.015
Citation: 01006B
Citation Type: Serious
Abatement Date: 08/14/2017
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/11/2017
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): R
Gravity: 10
Report ID: 0728500
Contest Date: 07/17/2017
Final Order: 08/09/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/09/2018 | $0.00 | 08/14/2017 | Serious | |
| Penalty | C: Contested | 07/19/2017 | $0.00 | 08/14/2017 | Serious | |
| Penalty | Z: Issued | 07/11/2017 | $0.00 | 08/14/2017 | Serious |
Text For Citation: 01 Item/Group: 006B Hazard:
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): (a) Employees were exposed to amputation hazards from the 500 Machine manufactured by Vicon Machinery. Employees were exposed to ingoing nippoints from belts and pulleys which were not fully enclosed within 42 inches from the floor. Conveyor sections of the 500 Machine had horizontal belts which were not fully enclosed. On or about February 3, 2017 an employee received a partial amputation of their finger when the employee's hand got caught in the rotating shaft, and horizontal belts and pulleys while operating the 500 Machine. (b) Employees were exposed to amputation hazards from the Old Collar Line manufactured by Vicon Machinery. Employees were exposed to ingoing nippoints from belts and pulleys which were not fully enclosed. Conveyor sections of the Old Collar Line had horizontal belts with both runs within 42 inches from the floor which were not fully enclosed.