Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 993351.015
Citation: 01006A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,000.00
Current Penalty: $5,180.00
Issuance Date: 03/03/2015
Nr Instances: 17
Nr Exposed: 72
Abatement Date: 04/05/2015
Gravity: 10
Report ID: 0215800
Contest Date: 03/20/2015
Final Order: 03/31/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 03/31/2016 | $5,180.00 | 04/05/2015 | Serious | |
| Penalty | C: Contested | 03/25/2015 | $7,000.00 | 04/05/2015 | Serious | |
| Penalty | Z: Issued | 03/03/2015 | $7,000.00 | 04/05/2015 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Finishing Department, on or about 9/4/14: Banders were not provided with guards to prevent contact with rotating parts such as but not limited to the ink rollers and table. d) Machine Shop, on or about 9/17/14: Bostomatic CNC machine was not provided with a guard to prevent contact with the rotating serrated chuck and tool.