Translate
Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1381046.015
Citation: 01006A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,168.00
Current Penalty: $1,250.00
Issuance Date: 08/22/2019
Nr Instances: 8
Nr Exposed: 23
Abatement Date: 09/20/2019
Gravity: 5
Report ID: 0521100
Contest Date: 09/16/2019
Final Order: 09/04/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 09/04/2020 | $1,250.00 | 09/20/2019 | Serious | |
| Penalty | C: Contested | 01/02/2020 | $4,168.00 | 09/20/2019 | Serious | |
| Penalty | Z: Issued | 08/22/2019 | $4,168.00 | 09/20/2019 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings shall be protected from abrasion, and openings through which conductors enter shall be effectively closed. (a) On or about February 26, 2019, conduit above grinding station #2 was pulled apart from the junction box and not effectively closed exposing the conductors to strain and abrasion. (b) On or about February 26, 2019, conduit above grinding station #8 was pulled apart from the junction box and not effectively closed exposing the conductors to strain and abrasion. (c) On or about February 26, 2019, conduit above grinding station #9 was pulled apart from the junction box and not effectively closed exposing the conductors to strain and abrasion. (d) On or about February 26, 2019, conduit above grinding station #10 was pulled apart from the junction box and not effectively closed exposing the conductors to strain and abrasion. (e) On or about February 26, 2019, conduit above grinding station #12 was pulled apart from the junction box and not effectively closed exposing the conductors to strain and abrasion. (f) On or about February 26, 2019, the junction box providing power to the electric motor powering the Fox Model 630R4 stand grinder was not closed to the motor, placing strain on the conductors and exposing them to strain and abrasion. (g) On or about February 26, 2019, conduit on the east wall near the exit door was pulled away from the junction box and not effectively closed exposing the conductors to strain and abrasion. (h) On or about February 26, 2019, conduit fittings for the main power supply entering the building were damaged by forklifts and not effectively closed, exposing the conductors to strain and abrasion.