Violation Detail
Standard Cited: 19100134 C01 Respiratory Protection.
Inspection Nr: 1345312.015
Citation: 01006A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $3,696.00
Current Penalty: $1,848.00
Issuance Date: 11/29/2018
Nr Instances: 4
Nr Exposed: 9
Abatement Date: 02/28/2019
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 12/26/2018
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 12/26/2018 | $1,848.00 | 02/28/2019 | Serious | |
Penalty | Z: Issued | 11/29/2018 | $3,696.00 | 12/19/2018 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.134(c)(1): In any workplace where respirators are necessary to protect employee health or whenever respirators are required by the employer, a written respiratory protection program with worksite specific procedures was not established and implemented: a.) On or about September 10, 2018, the blasters were required to wear an HY-02 supplied air respirator by the employer; however, the company had not implemented a written respiratory protection program. b.) On or about September 10, 2018, the robotic cell operators were required to wear a half face Moldex tight fitting respirator by the employer; however, the company had not implemented a written respiratory protection program. c.) On or about September 10, 2018, the powder coaters were required to wear a N-95 filtering face piece respirator by the employer; however, the company had not implemented a written respiratory protection program. d.) On or about September 10, 2018, the spray painters were voluntarily wearing a half face 3M tight fitting respirator by the employer; however, the company had not implemented a written respiratory protection program.