Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1299566.015
Citation: 01006A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,114.00
Current Penalty: $4,979.80
Issuance Date: 05/02/2018
Nr Instances: 4
Nr Exposed: 3
Abatement Date: 05/29/2018
Gravity: 5
Report ID: 0316400
Contest Date:
Final Order: 05/18/2018
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/18/2018 | $4,979.80 | 05/29/2018 | Serious | |
| Penalty | Z: Issued | 05/02/2018 | $7,114.00 | 05/29/2018 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Handle Mill: On or about March 6, 2018 the employer had not developed and documented energy control procedures for equipment on site including, but not limited to, the L-M Pond and Deck Saw Model 75 HC Serial Number 1765 that outlined the scope, purpose, authorization, rules and techniques to control hazardous energy and the means to enforce compliance with the procedures. This equipment has hydraulics and electric as its energy sources. (b) Handle Mill: On or about March 6, 2018 the employer had not developed and documented energy control procedures for equipment on site including, but not limited to, the Log Carriage that outlined the scope, purpose, authorization, rules and techniques to control hazardous energy and the means to enforce compliance with the procedures. This equipment has electric and air as its energy sources. (c) Handle Mill: On or about March 6, 2018 the employer had not developed and documented energy control procedures for equipment on site including, but not limited to, the Head Saw that outlined the scope, purpose, authorization, rules and techniques to control hazardous energy and the means to enforce compliance with the procedures. This equipment has electric and air as its energy sources. (d) Handle Mill: On or about March 6, 2018 the employer had not developed and documented energy control procedures for equipment on site including, but not limited to, the electric operated Dowel Milling Machine that outlined the scope, purpose, authorization, rules and techniques to control hazardous energy and the means to enforce compliance with the procedures. This operation has had a history of serious injuries related to improper energy isolation.