Translate
Violation Detail
Standard Cited: 19100036 G02 Design and construction requirements for exit routes.
Inspection Nr: 1059368.015
Citation: 01006A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $3,000.00
Current Penalty: $500.00
Issuance Date: 09/22/2015
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 01/31/2016
Gravity: 1
Report ID: 0213900
Contest Date: 10/14/2015
Final Order: 06/03/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 06/03/2016 | $500.00 | 01/31/2016 | Serious | |
| Penalty | C: Contested | 10/19/2015 | $3,000.00 | 10/14/2015 | Serious | |
| Penalty | Z: Issued | 09/22/2015 | $3,000.00 | 10/14/2015 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points. a)9000 River Rd, Delair, NJ Saw House (number 2 billet saw): Exit access along the table was 11 inches wide, observed on or about 4/16/15. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.