Translate
Violation Detail
Standard Cited: 50104 A General Duty
Inspection Nr: 316218098
Citation: 01006
Citation Type: Serious
Abatement Status: X
Initial Penalty: $1,200.00
Current Penalty: $600.00
Issuance Date: 02/06/2012
Nr Instances: 34
Nr Exposed: 11
Abatement Date: 02/06/2012
Gravity: 08
Report ID: 0352410
Contest Date: 02/16/2012
Final Order: 09/24/2012
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 09/24/2012 | $600.00 | 02/06/2012 | Serious | |
| Penalty | Z: Issued | 02/06/2012 | $1,200.00 | 02/06/2012 | Serious |
Text For Citation: 01 Item/Group: 006 Hazard: CRUSHING
Labor and Employment Article, Section 5-104(a): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a)Date of Violation:On or About 11/18/11 Location:Warehouse Condition:Employees were exposed to crush/struck-by hazards from collapsing steel storage racks that were accessed by a forklift and were not secured to the floor. Among other methods, one feasible and acceptable abatement method to correct this hazard is to follow ANSI MH16.1:2008, 1.4.7 Specification For The Design, as specified in Section 7.2. All rack columns shall be anchored to the floor with anchor bolts capable of resisting the forces caused by the horizontal and vertical loads on the rack.