Translate
Violation Detail
Standard Cited: 19100213 I01 Woodworking machinery requirements.
This violation item has been deleted.
Inspection Nr: 1740810.015
Citation: 01006
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $11,292.00
Current Penalty: $0.00
Issuance Date: 10/04/2024
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity: 10
Report ID: 0626000
Contest Date: 10/16/2024
Final Order: 03/12/2025
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/12/2025 | $0.00 | Serious | ||
| Penalty | C: Contested | 10/18/2024 | $11,292.00 | Serious | ||
| Penalty | Z: Issued | 10/04/2024 | $11,292.00 | Serious |
Text For Citation: 01 Item/Group: 006 Hazard:
29 CFR 1910.213(i)(1):All portions of the saw blade was not enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard did not protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall be made to conform to the travel of the saw on the wheel: On or about April 10, 2024, and times prior to, in the fitting bay the employer did not ensure unused portions of the saw blade on the Rockwell Delta Band Saw was enclosed or guarded as required. This condition exposed employees to amputation hazards.