Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1572101.015
Citation: 01006
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,215.00
Current Penalty: $6,215.00
Issuance Date: 06/21/2022
Nr Instances: 3
Nr Exposed: 1
Abatement Date: 07/18/2022
Gravity: 1
Report ID: 0729700
Contest Date:
Final Order: 07/19/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/19/2022 | $6,215.00 | 07/18/2022 | Serious | |
| Penalty | Z: Issued | 06/21/2022 | $6,215.00 | 07/18/2022 | Serious |
Text For Citation: 01 Item/Group: 006 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employees engaged in machining/maintenance activities at the following pieces of equipment located in the Maintenance Shop were exposed to struck-by and amputation hazards in that machine guarding was not provided and utilized. Employees were not provided protection from flying chips and debris: a) Birmingham YCL-1236GH Horizontal Lathe/Mill machine, the rotating drill chuck was not guarded. b) Birmingham YCL-1660 Horizontal Lathe/Mill machine, the rotating drill chuck was not guarded. c) Bridgeport Drill Press machine, the rotating drill chuck was not guarded.