Text For Citation: 01 Item/Group: 006 Hazard:

29 CFR 1910.119(j)(4)(iii): The frequency of inspections and tests of process equipment was not consistent with applicable manufacturers' recommendations and good engineering practices, and more frequently if determined to be necessary by prior operating experience: (a) During the 2008 and 2013 turnarounds, where inspection findings of outside contractor on the spent catalyst slide valve showed erosion, the employer did not ensure generally accepted good engineering practices before placing the spent catalyst slide valve back into service. Recommended Abatement: Prior to placing equipment back into service, inspection and tests of equipment should be addressed per the facilitys Mechanical Integrity Program and recognized and generally accepted good engineering practices.