Violation Detail
Standard Cited: 19100269 L08 V Electric Power Generation, Transmission, and Distribution.
Inspection Nr: 1305883.015
Citation: 01006
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $12,934.00
Current Penalty: $12,934.00
Issuance Date: 07/31/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 08/06/2018
Gravity:
Report ID: 0420100
Contest Date: 08/24/2018
Final Order: 11/04/2019
Related Event Code (REC): R
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 11/04/2019 | $12,934.00 | 08/06/2018 | Other | |
Penalty | C: Contested | 08/28/2018 | $12,934.00 | 08/06/2018 | Serious | |
Penalty | Z: Issued | 07/31/2018 | $12,934.00 | 08/06/2018 | Serious |
Text For Citation: 01 Item/Group: 006 Hazard:
29 CFR 1910.269(l)(8)(v): The employer did not ensure that each employee exposed to hazards from electric arcs wore protective clothing and other protective equipment that had an arc rating greater than or equal to the heat energy estimated under paragraph (l)(8)(ii) of this section whenever that estimate exceeded 2.0 cal/cm2. This protective equipment shall cover the employee's entire body, except as listed in paragraphs (A) - (E): (a) On or about 3/16/2018 - Cooling Tower Lift Pump Station 6.9 KV Cooling Tower Board B Compartment 2, the employer did not ensure that an employee was wearing protective clothing and other protective equipment that had a minimum arc rating of 12.4 cal/cm2 when he was within the 16.5 foot arc flash boundary, the compartment door was open, and 6.9 KV cable continuity checks were being performed at the ground and test device GT-22 (ground truck). (b) On or about 3/16/2018 - Cooling Tower Lift Pump Station 6.9 KV Cooling Tower Board B Compartment 2, the employer did not ensure that an employee was wearing protective clothing and other protective equipment that had a minimum arc rating of 12.4 cal/cm2 when he was within the 16.5 foot arc flash boundary, the compartment door was open, a foreign material inspection was being conducted, and the shutter panel was open or being manipulated.