Translate
Violation Detail
Standard Cited: 19100213 Q02 Woodworking machinery requirements.
Inspection Nr: 1650860.015
Citation: 01005F
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 08/01/2023
Nr Instances: 2
Nr Exposed: 3
Abatement Date: 09/08/2023
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 08/22/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/22/2023 | $0.00 | 09/08/2023 | Serious | |
| Penalty | Z: Issued | 08/01/2023 | $0.00 | 08/23/2023 | Serious |
Text For Citation: 01 Item/Group: 005F Hazard:
29 CFR 1910.213(q)(2): Veneer clippers shall have automatic feed or shall be provided with a guard which will make it impossible to place a finger or fingers under the knife while feeding or removing the stock. At a workplace located at 210 Maple Street, Denmark, Wisconsin in the Veneer Room; the powered veneer clipper was not equipped with guarding to prevent access to the hazardous downward motion of the blade when engaged. The front and back sides of the blade were not guarded adequately and would permit exposure to the downward stroke by the operator.