Text For Citation: 01 Item/Group: 005C Hazard:

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) American Excelsior Co. - Norwalk, Ohio: On or about May 2, 2013, the employer did not assure lockout devices were affixed to the energy isolating device(s) of the MST 8-foot erosion control blanket line. Employees that performed troubleshooting tasks were exposed to the unexpected start-up of belts, pulleys, and moving equipment while accessing the hazard area located near the stitching section of the machine. b) American Excelsior Co. - Norwalk, Ohio: On or about May 6, 2013, the employer did not assure lockout devices were affixed to the energy isolating device(s) of the Harmony Enterprises V72HS baler. Employees servicing the baler were exposed to the unexpected start-up of the machine while accessing the hazard area to replace parts. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.