Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1740802.015
Citation: 01005B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/04/2024
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 10/17/2024
Gravity: 10
Report ID: 0418100
Contest Date: 10/28/2024
Final Order: 03/26/2025
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/26/2025 | $0.00 | 10/17/2024 | Serious | |
| Penalty | C: Contested | 11/19/2024 | $0.00 | 10/17/2024 | Serious | |
| Penalty | Z: Issued | 10/04/2024 | $0.00 | 10/17/2024 | Serious |
Text For Citation: 01 Item/Group: 005B Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) The employer fails to ensure effective measures to prevent struck-by and caught-in hazards as demonstrated on or about May 20, 2024 to May 23, 2024, at Curing lines A through F that include 10 machines per line, where an employee engages in maintenance activities such as, but not limited to, removing and installing bladders and cleaning bottom plates. To abate this hazard, the employer must ensure that the machines at Curing lines A through F are shut down or turned off properly and the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], stored energy [(d)(5), if applicable], and verification of isolation [(d)(6)] are implemented.