Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1504356.015
Citation: 01005B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,632.00
Current Penalty: $0.00
Issuance Date: 04/16/2021
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 05/14/2021
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 05/04/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/04/2021 | $0.00 | 05/14/2021 | Serious | |
| Penalty | Z: Issued | 04/16/2021 | $6,632.00 | 05/14/2021 | Serious |
Text For Citation: 01 Item/Group: 005B Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes. In the Maintenance Department, the GEM Tools abrasive grinder did not have a guard over the inclined pulley used to power the holder exposing employees to entanglement hazards.