Translate
Violation Detail
Standard Cited: 19100213 N01 Woodworking machinery requirements.
Inspection Nr: 1374648.015
Citation: 01005A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,293.00
Current Penalty: $4,375.80
Issuance Date: 07/17/2019
Nr Instances: 3
Nr Exposed: 2
Abatement Date: 08/14/2019
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 08/08/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/08/2019 | $4,375.80 | 08/14/2019 | Serious | |
| Penalty | Z: Issued | 07/17/2019 | $7,293.00 | 08/14/2019 | Serious |
Text For Citation: 01 Item/Group: 005A Hazard:
29 CFR 1910.213(n)(1): Each planing, molding, sticking, and matching machine shall have all cutting heads, and saws if used, covered by a metal guard. If such guard is constructed of sheet metal, the material used shall be not less than 1/16 inch in thickness, and if cast iron is used, it shall be not less than three-sixteenths inch in thickness. a. On or about March 19, 2019, the Mattison Machine Works model 276 molder in the Molding Room was not covered with metal guards that enclosed the cutting heads. b. On or about March 19, 2019, the S. A. Woods Molder 137MT in the Molding Room was not covered with metal guards that enclosed the cutting heads. c. On or about February 12, 2019, the Yates-American Machine Company (serial # 30049), located in the New Planing Mill was not equipped with a metal guard that enclosed the cutting head.