Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 949007.015
Citation: 01005
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $2,800.00
Current Penalty: $2,800.00
Issuance Date: 11/29/2013
Nr Instances: 1
Nr Exposed: 8
Abatement Date: 12/18/2013
Gravity: 10
Report ID: 0626600
Contest Date:
Final Order: 12/24/2013
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 11/29/2013 | $2,800.00 | 12/18/2013 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s): The employer does not guard the point of operation on machines whose operation exposes employees to injury. This violation was observed on or about November 19, 2013, in the fabrication area, located in the northwest corner of the building, where employees were exposed to a struck-by hazard when operating a Jinshin brand drill press BPV3942 without a point of operation guard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all the point of operations on all machines are guarded.