Translate
Violation Detail
Standard Cited: 95012901
Inspection Nr: 309047173
Citation: 01005
Citation Type: Serious
Abatement Status: X
Initial Penalty: $688.00
Current Penalty: $378.40
Issuance Date: 05/31/2005
Nr Instances: 3
Nr Exposed: 50
Abatement Date: 06/24/2005
Gravity:
Report ID: 0453730
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/09/2005 | $378.40 | 06/24/2005 | Serious | |
| Penalty | Z: Issued | 05/31/2005 | $688.00 | 06/24/2005 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard: UNAPEQUIP
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)Lathe Area - -The control buttons on the pendant controls for the hoists mounted on Cranes #9, #34, and #48 were not marked to indicate the direction of resultant motion. REFERENCE:ANSI/ASME B30.16-2003 - Overhead Hoists (Underhung), Chapter 16-1 - Marking, Construction, and Installation, Section 16-1.1.2 - Controls: Each control actuator of an electric- or air-powered hoist shall be marked to indicate the direction of resultant motion. NOTE:Among other methods, one feasible and acceptable method to correct this hazard is to label each control button on the pendant control with a word or arrow that clearly details the motion of the hoist/hook when the control button is activated.