Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1582064.015
Citation: 01005
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $5,801.00
Current Penalty: $3,000.00
Issuance Date: 07/28/2022
Nr Instances: 1
Nr Exposed: 5
Abatement Date:
Gravity: 10
Report ID: 0214200
Contest Date:
Final Order: 08/19/2022
Related Event Code (REC): I;R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/19/2022 | $3,000.00 | Serious | ||
| Penalty | Z: Issued | 07/28/2022 | $5,801.00 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, was not guarded. The guarding device was not in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. Location: 34 Loretto Street, Irvington, NJ 07111 - Manufacturing Area a) Employees were exposed to amputation hazards while conducting packing operations on Line 1 thermoforming machine that dispensed plastic plates with no guarding mechanisms installed near the internal trim station. An employee sustained a partial finger amputation near the point of operation. The incident occurred on or about 2/27/22.