Translate
Violation Detail
Standard Cited: 19100217 F02 Mechanical power presses.
Inspection Nr: 1505531.015
Citation: 01005
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,288.00
Current Penalty: $6,144.00
Issuance Date: 03/05/2021
Nr Instances: 1
Nr Exposed: 60
Abatement Date: 03/31/2021
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 04/05/2021
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/05/2021 | $6,144.00 | 03/31/2021 | Serious | |
| Penalty | Z: Issued | 03/05/2021 | $12,288.00 | 03/31/2021 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.217(f)(2):Instruction to operators. The employer shall train and instruct the operator in the safe method of work before starting work on any operation covered by this section. The employer shall insure by adequate supervision that correct operating procedures are being followed. On or about 11/30/2020 the employer did not provide adequate training to ensure employees understood safe methods of operating the part revolution press AIDA 250 Power Press model # NCS-250(2) and its auxiliary parts such as the AIDA Straightener Feeder (model # LFG-600). Operators and loaders were trained utilizing an inadequate safety procedure that did not secure the pneumatic power to the straightener feeder coil when employees would enter the interlocked gate to setup and make adjustments to the coiler.