Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1446214.015
Citation: 01005
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,711.00
Current Penalty: $4,626.60
Issuance Date: 02/21/2020
Nr Instances: 5
Nr Exposed: 13
Abatement Date: 03/31/2022
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 03/11/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/11/2020 | $4,626.60 | 03/31/2022 | Serious | |
| Penalty | Z: Issued | 02/21/2020 | $7,711.00 | 04/10/2020 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. (a) In Building 5, Prism High Speed Cutter (Model: QZK-920-1, Size: 92, S/N: 986,1039) had an unguarded clamp and the light curtain was positioned approximately 6 inches above the table which allowed access under the presence sensing guard, exposing employees to struck-by and amputation hazards.