Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1382761.015
Citation: 01005
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,282.00
Current Penalty: $4,641.00
Issuance Date: 07/24/2019
Nr Instances: 7
Nr Exposed: 15
Abatement Date: 09/30/2019
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 08/07/2019
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/07/2019 | $4,641.00 | 09/30/2019 | Serious | |
| Penalty | Z: Issued | 07/24/2019 | $9,282.00 | 08/26/2019 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about March 5, 2019, the employer failed to ensure that machinery including, but not limited to the following, had machine guarding methods in place: a) The Okuma LC20-2ST #1, S/N 6106-3503, did not have working interlocks. b) The Okuma LC20-2ST #2, S/N 6212-3800, did not have working interlocks. c) The Okuma LC20-2ST #3, S/N 6301-3740, did not have working interlocks. d) The Okuma LC30-2SC #1, S/N 6108-1444, did not have working interlocks. e) Morei Seiki SL-15 small lathe MFG#74 f) Threadmill machines 1A, 2A, 3A, 4A, 5A, 6A, and 121 were not equipped with guards around the hobs to prevent accidental contact. g) The tool room Yamazaki Machinery Works Ltd. lathe was not equipped with an adequate chuck guard to prevent flying chips and sparks. Part of the guard was replaced with a piece of cardboard. h) The Acme-Gridley Screw Machines, to include but not limited too, #17 did not have working interlocks.