Text For Citation: 01 Item/Group: 005 Hazard:

29 CFR 1910.147(c)(7)(i)(A): Each authorized employee had not received training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: i. The employer is failing to protect employees from caught-in, struck-by, and amputation hazards associated with servicing and maintaining equipment with hazardous stored energy. This was most recently documented at a worksite located at 1078 S Jefferson Ave, Lebanon, Missouri. On or before February 12, 2019, employees had not been trained to understand and demonstrate the knowledge and skills required to safely lock and tag out the energy sources for, including but not limited to The Weing Gruppe Profimat 26 Super known to company as 517 - Moulder # 4 machine. An affected employee in the Heading Department was affixing an energy isolating device to the Moulder # 4 machine. ii. The employer is failing to protect employees from caught-in, struck-by, and amputation hazards associated with servicing and maintaining equipment with hazardous stored energy. This was most recently documented at a worksite located at 1078 S Jefferson Ave, Lebanon, Missouri, on or before April 18, 2019, an affected employee in the Alternatives Department was affixing a energy isolating device for including but not limited to the Band Saw.