Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1250550.015
Citation: 01005
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $11,641.00
Current Penalty: $6,000.00
Issuance Date: 01/18/2018
Nr Instances: 4
Nr Exposed: 7
Abatement Date: 02/01/2018
Gravity: 10
Report ID: 0627100
Contest Date:
Final Order: 02/13/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/13/2018 | $6,000.00 | 02/01/2018 | Serious | |
| Penalty | Z: Issued | 01/18/2018 | $11,641.00 | 02/01/2018 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about July 27, 2017 and at times prior thereto, at the worksite located at 4560 Highway 412 East, Siloam Springs, Arkansas, there was inadequate guarding of the area of operations on the following machines: A. 480V CEMCO Multi-press# 1, unknown model and CEMCO Multi-press# 2, unknown model. Press #1 consisted of 8 drill bits and press #2 consisted of 6 drill bits. The drill bits were actuated by a foot pedal. The machine had a front guard that would depress when the foot pedal was actuated; however it would not stop the cycle if an employees hand was in the area of operation. B. Up-cut saws #2 and # 5, unknown model and manufacturer. Both saws were foot actuated and the area of operation was guarded by a stationary guard and employees had the ability to place their entire arm into the area of operation.