Text For Citation: 01 Item/Group: 005 Hazard:

29 CFR 1926.960(d)(2): Requirements for working without electrical protective equipment. When an employee performs work near exposed parts energized at more than 600 volts, but not more than 72.5 kilovolts, and is not wearing rubber insulating gloves, being protected by insulating equipment covering the energized parts, performing work using live-line tools, or performing live-line barehand work under � 1926.964(c), the employee was not working from a position where he or she could not reach into the minimum approach distance, established by the employer under paragraph (c)(1) of this section: At Freymuth Road near Eisenbath Road intersection in Saint Paul, MO 63366 - On or about 05/05/2016, employees were exposed to the hazard of being contacted by electricity while performing work near exposed parts energized at approximately 7,200 volts, and were not wearing rubber insulating gloves, being protected by insulating equipment covering the energized parts, performing work using live-line tools, or performing live-line barehand work under � 1926.964(c), the employees were not working from a position where he or she could not reach into the minimum approach distance, established by the employer under paragraph (c)(1) of this section. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19