Translate
Violation Detail
Standard Cited: 19100305 C04 Wiring methods, components, and equipment for general use.
Inspection Nr: 1090928.015
Citation: 01005
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $7,000.00
Current Penalty: $1,100.00
Issuance Date: 03/10/2016
Nr Instances: 1
Nr Exposed: 5
Abatement Date:
Gravity: 10
Report ID: 0214700
Contest Date: 03/30/2016
Final Order: 03/01/2018
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 03/01/2018 | $1,100.00 | Other | ||
| Penalty | C: Contested | 03/31/2016 | $7,000.00 | Serious | ||
| Penalty | Z: Issued | 03/10/2016 | $7,000.00 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.305(c)(4): Snap switches mounted in boxes did not have faceplates installed so as to completely cover the opening and seat against the finished surface: (a) Packaging Room, Line 6 - On, or about September 11, 2015, the electrical enclosure housing the on/off snap switch on the Hamer Automated Packaging System, Model # 125-5 / Serial # 15816063, did not have a faceplate cover installed over the opening. Note: Abatement for this violation was previously documented; therefore, the employer is not required to submit abatement certification or documentation for this violation in accordance with 29 CFR 1903.19.