Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1051081.015
Citation: 01005
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $3,500.00
Current Penalty: $1,750.00
Issuance Date: 05/12/2015
Nr Instances: 6
Nr Exposed: 12
Abatement Date: 10/05/2015
Gravity: 5
Report ID: 0626600
Contest Date:
Final Order: 06/02/2015
Related Event Code (REC): C
Emphasis:
| Failure to Abate | |||||||
|---|---|---|---|---|---|---|---|
| Activity Nr | Issuance | Penalty | Contest | Final Order | |||
| 1116352 | 02/24/2016 | $3,500.00 | 03/29/2016 | ||||
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $1,750.00 | 10/05/2015 | Serious | ||
| FTA | I: Informal Settlement | 03/29/2016 | $3,500.00 | 07/01/2016 | 1116352.015 | |
| FTA | Z: Issued | 02/24/2016 | $35,000.00 | 03/14/2016 | 1116352.015 | |
| Penalty | I: Informal Settlement | 06/02/2015 | $1,750.00 | 07/06/2015 | Serious | |
| Penalty | Z: Issued | 05/12/2015 | $3,500.00 | 06/01/2015 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: The employer does not guard the point of operation of machines whose operation exposes an employee to injury. a. This violation occurred on or about April 1, 2015, and times prior thereto, where employees were exposed to a struck-by hazard when operating a Pro-Master band saw, Model BS10, without the unused sections of the blade being guarded. b. This violation was observed on or about April 2, 2015, and times prior thereto, where employees were exposed to a struck-by hazard when operating a MSC manual mill, ID #12, without a point of operation guard. c. This violation was observed on or about April 2, 2015, and times prior thereto, where employees were exposed to a struck-by hazard when operating a Carlton drill press, ID #15, without a point of operation guard. d. This violation occurred on or about April 1, 2015, and times prior thereto, where employees were exposed to a struck-by hazard when operating a Pratt & Whitney vertical shaper, ID #13, without a point of operation guard. e. This violation occurred on or about April 1, 2015, and times prior thereto, where employees were exposed to a struck-by hazard when operating a Steptoe horizontal shaper, ID #6, without a point of operation guard. f. This violation occurred on or about April 1, 2015, and times prior thereto, where employees were exposed to a struck-by hazard when operating a Carlton Drill Press, 8 ft. Arm on Column , ID #24, without a point of operation guard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that the point of operation of machines whose operation exposed an employee to injury, are guarded.