Translate
Violation Detail
Standard Cited: 19100217 E01 II Mechanical power presses.
Inspection Nr: 1647325.015
Citation: 01004F
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/12/2023
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 10/02/2023
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 05/31/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | 08/21/2023 | $0.00 | 10/02/2023 | Serious | |
| Penalty | I: Informal Settlement | 05/31/2023 | $0.00 | 06/08/2023 | Serious | |
| Penalty | Z: Issued | 05/12/2023 | $0.00 | 06/08/2023 | Serious |
Text For Citation: 01 Item/Group: 004F Hazard:
29 CFR 1910.217(e)(1)(ii):Inspection and Maintenance Records. Under the directed component of the inspection program, the employer shall: (A) Inspect and test each press on a regular basis at least once a week to determine the condition of the clutch/brake mechanism, antirepeat feature, and single-stroke mechanism; (B) Perform and complete necessary maintenance or repair, or both, on the clutch/brake mechanism, antirepeat feature, and single-stroke mechanism before operating the press; and (C) Maintain a certification record of each maintenance task performed under the directed component of the inspection program that includes the date of the maintenance task, the signature of the person who performed the maintenance task, and the serial number, or other identifier, of the power press maintained. Note to paragraph (e)(1)(ii): Inspections of the clutch/brake mechanism, antirepeat feature, and single-stroke mechanism conducted under the directed component of the inspection program are exempt from the requirement to maintain certification records specified by paragraph (e)(1)(i)(C) of this section, but inspections of the clutch/brake mechanism, antirepeat feature, and single-stroke mechanism conducted under the general component of the inspection program are not exempt from this requirement. a) On or before February 1, 2023, the employer did not develop or implement a directed component of the inspection program that included the requirements of (A) through (C), in that employees were not conducting inspections of the Walsh Press & Die Co No 55 full revolution and Aida 200 Ton part revolution presses.