Translate
Violation Detail
Standard Cited: 19260405 G02 IV Wiring methods, components, and equipment for general use.
Inspection Nr: 1358480.015
Citation: 01004C
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/19/2019
Nr Instances: 4
Nr Exposed: 5
Abatement Date:
Gravity: 5
Report ID: 0524500
Contest Date:
Final Order: 04/16/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/16/2019 | $0.00 | Serious | ||
| Penalty | Z: Issued | 03/19/2019 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 004C Hazard:
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: On or about November 6, 2018, employees using circular saws and other electric power tools were exposed to electric shock hazards and the employer did not ensure that cord sets and power tool cords were provided strain relief to prevent damage to the equipment: a. The plug end of an extension cord used to power a DeWalt circular saw used on the south end of the building was not provided strain relief and was damaged. b. The plug end of a DeWalt circular saw used on the south end of the building was not provided strain relief and was damaged. c. The conductors entering a relocatable power strip powering battery chargers near the generator was not provided strain relief and the outer insulation was pulled away. d. The plug end of an extension cord used to power a DeWalt circular saw on the north end of the building was not provided strain relief and conductors were exposed.