Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1683623.015
Citation: 01004B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/22/2023
Nr Instances: 2
Nr Exposed: 3
Abatement Date: 04/01/2024
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 01/23/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/23/2024 | $0.00 | 04/01/2024 | Serious | |
| Penalty | Z: Issued | 12/22/2023 | $0.00 | 01/24/2024 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes. (a) On or about July 19, 2023, at an establishment located at 121 Cedar Street, in Tigerton, Wisconsin; in the Sawmill, employees were cleaning around the unguarded inclined belt and pulley assembly on the bottom guard for the Six Feet Roll Case motor exposing employees to entanglement hazards. (b) On or about July 19, 2023, at an establishment located at 121 Cedar Street, in Tigerton, Wisconsin; in the Sawmill, employees were cleaning in near proximity of an unguarded inclined belt and pulley assembly below the West Seven Feet Head Saw exposing employees to entanglement and struck by hazards.